High-tech enterprises step up their efforts: Guangzhou Xiangcheng Electronics is deeply engaged in the smart governance and smart power sectors by offering customized smart motherboards.
# High-tech Enterprises Step Up Their Game: Guangzhou Xiangcheng Electronics Deepens Its Footprint in Smart Governance and Smart Power Through Customized Smart Motherboards
In the wave of deep integration between the digital economy and the real economy, high-tech enterprises are emerging as the core engine driving industrial upgrading. As a technology-based small and medium-sized enterprise rooted in Panyu, Guangzhou, Guangzhou Xiangcheng Electronic Technology Co., Ltd. has leveraged its independently developed, domestically produced smart motherboards to build a differentiated competitive edge in fields such as smart governance and intelligent power. Its technological roadmap and industrial layout provide a replicable practical model for the industry.
## I. Technological Foundation: Deep Integration of Domestically Produced Chips and Independent Systems
Xiangcheng Electronics’ core competitiveness stems from its full-stack mastery of domestically developed technologies. The company’s self-developed XC3576H and XC3588H series industrial control motherboards are equipped with Rockchip RK3576 and RK3588 octa-core processors, integrating an NPU unit with 6 TOPS of computing power. These boards also support 8K high-definition decoding and multi-screen simultaneous display capabilities. Thanks to these hardware features, they deliver superior performance—high throughput and low latency—when handling applications such as government big data visualization and real-time monitoring of power equipment.
More critically, Xiangcheng Electronics has achieved comprehensive domestic adaptation—from the chip level all the way up to the system level. Its XC3576H and XC3566BP motherboards have already passed mutual certification with the Galaxy Kirin operating system, and the XC3588H series even supports domestically developed information technology innovation systems such as Starlight Kirin. This “chip-plus-system” dual-autonomy model effectively mitigates supply-chain risks and provides a secure and controllable underlying foundation for government service terminals and power dispatch equipment. For example, in the self-service terminals deployed at the Guangzhou Municipal Service Center, the XC3588H motherboard, through a hybrid network configuration combining dual-gigabit Ethernet ports with a 5G module, enables real-time synchronization of business processing data with the government cloud. The daily processing capacity per device has increased by 40% compared to traditional solutions.
## II. Smart Governance: Scenario-Based Innovation from the Edge to the Cloud
In the field of government digitalization, Xiangcheng Electronics has developed a full-chain solution featuring “terminal sensing—edge computing—cloud-based management.” The government integrated machine equipped with its XC3588H industrial control motherboard, thanks to its multi-interface design supporting LVDS/EDP/MIPI, can flexibly connect to peripherals such as dual-screen displays, fingerprint recognition modules, and high-resolution document scanners. This solution supports complex functions required for “one-stop service,” including document scanning, material verification, and electronic signature issuance. In a pilot project conducted by the Guangzhou Social Security Bureau, this solution reduced the processing time per window from 15 minutes to 8 minutes, cutting down on public waiting times by 65%.
In response to the security needs of government data, Xiangcheng Electronics has embedded a hardware-level encryption module into its motherboard design. Combined with the national cryptographic algorithms supported by the Kylin operating system, this approach has enabled the establishment of a comprehensive protection system covering the entire data lifecycle—from data collection through transmission. For example, in the edge computing nodes deployed on the Panyu District Government Cloud Platform, the XC3576H motherboard connects an external encryption card via the PCIe 3.0 interface to perform real-time de-identification of uploaded public-service data, ensuring that sensitive information never touches physical storage. This architecture—featuring “lightweight terminals, intelligent edge devices, and centralized cloud processing”—has become the recommended solution for Guangdong Province’s “Digital Government” initiative.
## III. Smart Power: Industrial-Grade Design Meets Extreme Environmental Challenges
The unique characteristics of the power industry place stringent demands on equipment stability. The XC3568 series industrial control motherboards from Xiangcheng Electronics feature a wide-temperature design, with an operating temperature range spanning from -20°C to 70°C. They have also passed the IP65 protection rating certification, enabling them to withstand the dual challenges posed by the humid environments of southern regions and the dusty conditions of northern areas. In a substation inspection robot project for the Southern Power Grid, the six-axis motion control algorithm integrated into these motherboards has enabled the equipment to achieve positioning accuracy of ±2 cm even in complex terrains, while boosting fault detection accuracy to 98.7%.
To meet the monitoring requirements for power equipment, Xiangcheng Electronics has developed a communication module that supports multiple protocols, including Modbus and IEC 61850. During the renovation of a 220kV substation in Guangzhou, the XC3576H motherboard, via four RS485 interfaces and ten UART ports, simultaneously connected to various devices such as temperature sensors, partial-discharge detectors, and circuit-breaker status monitors. As a result, the data acquisition cycle was reduced from minutes to seconds. Coupled with the real-time database built into the Kylin operating system, this solution has shortened the fault-warning response time to within 3 seconds, representing a 10-fold improvement in efficiency compared to traditional SCADA systems.
## IV. Ecological Synergy: From Single-Point Breakthroughs to Industry Chain Empowerment
Xiangcheng Electronics’ growth trajectory reflects the nurturing effect of Guangzhou’s digital economy ecosystem. As a core partner in Kirin Software’s South China ecosystem channel, the company participated in drafting the “Technical Specifications for Information Technology and Industrial Control Equipment in Guangdong Province,” and its motherboard products have been included in the Guangdong Provincial Government Procurement Electronic Marketplace Catalog. At the 2025 Kirin Software Ecosystem Conference, the joint solution—“Smart Government Terminal + Power Edge Gateway”—presented by both parties attracted expressions of interest in cooperation from over 200 system integrators.
This ecological synergy is now translating into competitive advantages for industrial clusters. The joint laboratory established by Xiangcheng Electronics and Rockchip has already incubated the XC3588CB core board, which supports 5G+AIoT applications. In collaboration with South China University of Technology, the “Smart Meter Reliability Testing Platform” has boosted the mean time between failures (MTBF) of its products to 80,000 hours. According to data from the Guangzhou Municipal Bureau of Industry and Information Technology, smart hardware enterprises in Panyu District—led by Xiangcheng Electronics—experienced a 37% year-on-year increase in output value in the first quarter of 2025, driving the overall upstream and downstream industrial chain to exceed 5 billion yuan in scale.
## V. Future Vision: Dual-Driven by Technological Iteration and Deepened Scenario Application
Looking ahead to the latter part of the 14th Five-Year Plan, Xiangcheng Electronics is focusing on two key technological directions: First, developing the XC36 series motherboards that support the RISC-V architecture, further reducing the cost of domestic substitution; second, creating AI edge computing boxes equipped with large-model inference acceleration engines, thereby meeting the needs of applications such as power equipment fault prediction and intelligent government customer service. Under the framework of Guangzhou’s “Smart Manufacturing Strong City” strategy, the company plans to invest 120 million yuan in R&D over the next three years and build a pilot production base for smart hardware. By 2028, the company aims to achieve an annual production capacity of 500,000 units, serving customers that include 80% of provincial-level government platforms and regional branches of the State Grid across China.
From the entrepreneurship park in Xinzao Town, Panyu District, to...
Next page
Recommended
From data center infrastructure monitoring to intelligent manufacturing, from energy power plants to AI‑driven security, in the era of domestically developed edge computing, Xiangcheng Electronics’ industrial control host series provides a stable and reliable hardware foundation, helping industries across the board achieve digital and intelligent transformation.
The XC3576H industrial control motherboard has now been fully adapted to Ubuntu 26.04 LTS, offering developers a high-performance, long‑support‑cycle, and feature‑rich ARM‑based open‑source solution for industrial applications.
The IPCA_3588E industrial control host features a self-developed XC3588E industrial motherboard and is built with exclusively new, original‑brand chips, delivering an integrated edge computing terminal that combines domestically produced chips with a domestic operating system.